Malone Standard Foam Block Universal Car Top Canoe Carrier Kit

Malone Standard Foam Block Universal Car Top Canoe Carrier Kit Review

Malone Standard Foam Block Universal Car Top Canoe Carrier Kit Feature

• Standard canoe kit for hauling single canoes short distances
• 4 universal-fit, 6-inch, non-skid EVA foam blocks
• 2 bow and stern tie-downs attach to front and rear of vehicle
• Pair of 15-foot side tie-down cords; 15-foot heavy-duty strap
• Includes 4 S-hooks; re-usable storage container and carrying case

An ideal budget option for canoeists, the Malone standard canoe kit includes everything you need to haul a single canoe on short trips. The canoe kit comes with four 6-inch non-skid universal foam blocks to hold the canoe in place, along with two 15-foot tie-down cords, a 15-foot heavy-duty strap, a set of bow and stern safety tie-downs, and four S-hooks. The blocks are made of high-quality EVA closed-cell foam, ensuring a soft ride for your canoe. The tie-downs, meanwhile, fit to the front, rear, and sides of your vehicle for maximum safety. (The kit also fits round, square, or factory oval cross rails.) Finally, the kit comes with a re-usable storage container and carrying case.

About Malone Auto Racks
Malone is the fastest-growing rack accessory company in North America, with a track record of more than 10 years of industry leadership and innovation. The company's products are sold in more than 1,500 outdoor online and retail stores throughout the U.S., Canada, Australia, and Europe. Malone operates from the coast of Maine, helping the company stay true to its mission and values. Everything Malone sells must be "simple to sell, simple to install, and simple to use." The company is built to enhance its customers' enjoyment of rivers, lakes, and oceans while minimizing their carbon footprint through aerodynamic transport design and complete material recycling.


Malone foam block car top canoe carrier kits & blocks offer an affordable transport system for your canoe. We use high quality EVA closed cell foam. All of our blocks are produced with state of the art computer fabrication to insure total quality. The Standard Canoe Kit includes everything you will need to safely transport one canoe. We included two polypropylene over-hull straps and bow and tern lines to insure a safe transport for your boat and fellow drivers on the road.

Old Town Side Saddle Canoe Motor Mount

Old Town Side Saddle Canoe Motor Mount Review

Old Town Side Saddle Canoe Motor Mount Feature

• Motor Mount allows you to affix gas or electric motor to any Old Town canoe
• Moves motor away from side of canoe, making it more comfortable to operate while looking forward
• Heavy-duty, rust-free aluminum bracket can hold engines up to three horsepower
• Installation and removal are quick and easy; hardwood block provides sure mounting surface for electric motors
• Adjustable for left- or right-handed operation; will not fit wood-trimmed canoes

The mount allows you to affix a gas or electric motor to any Old Town canoe for left- or right-handed operation.

The Old Town Standard Motor Mount allows you to affix a gas or electric motor to any Old Town canoe for added power and versatility. This mount moves the motor away from the side of the canoe, making it more comfortable to operate while looking forward. A heavy-duty, rust-free aluminum bracket can hold engines up to three horsepower.

Installation and removal are quick and easy, and the hardwood block provides a sure mounting surface for electric motors. The mount can be adjusted for left- or right-handed operation. Note it will not fit wood-trimmed canoes.

About Old Town
Old Town has a long tradition of innovative technology, dating back to 1898, when the company built its first wood-and-canvas canoe, based on a Native American birch bark design. In 1940, the company rendered the traditional seal-skin kayak design in more durable wood-and-canvas, and later introduced lightweight fiberglass models in the '50s.

Today, Old Town continually strives to advance the art of paddling through design improvements and lighter, more durable materials, such as three-layer polyethylene and Superlinear technologies.


The sidesaddle electric motor mount moves the motor away from the side of the canoe making it more comfortable to operate the motor while looking forward. Installation and removal are quick and easy. The cast aluminum bracket won't rust and the hardwood block gives a sure mounting surface for electric motors. DOES NOT FIT WOOD TRIMMED CANOES.

Old Town Canoe Motor Mount

Old Town Canoe Motor Mount Review

Old Town Canoe Motor Mount Feature

• Standard Motor Mount allows you to affix gas or electric motor to any Old Town canoe
• Enjoy added power and versatility on the water
• Heavy-duty aluminum bracket can hold engines up to three horsepower
• Attaches without wrenches
• Simply hand-tighten to the gunwales of your canoe for a sure, sturdy grip

The mount allows you to affix a gas or electric motor to any Old Town canoe.

The Old Town Standard Motor Mount allows you to affix a gas or electric motor to any Old Town canoe for added power and versatility. A heavy-duty aluminum bracket can hold engines up to three horsepower, and the mount attaches without wrenches�simply hand-tighten to the gunwales of your canoe for a sure, sturdy grip.

About Old Town
Old Town has a long tradition of innovative technology, dating back to 1898, when the company built its first wood-and-canvas canoe, based on a Native American birch bark design. In 1940, the company rendered the traditional seal-skin kayak design in more durable wood-and-canvas, and later introduced lightweight fiberglass models in the '50s.

Today, Old Town continually strives to advance the art of paddling through design improvements and lighter, more durable materials, such as three-layer polyethylene and Superlinear technologies.


The Old Town Motor Mount gives any Old Town Canoe the versatility you need in today's world. You don't always have the time to paddle to that great fishing spot, so now with a little help you can get there faster and be ready to fish without delay. The standard motor mount allows you to attach a gas or electric motor directly to your canoe.

Mad River Adventure 14' Canoe

Mad River Adventure 14' Canoe Review

Cruise the rivers and lakes in the Mad River® Adventure 14' canoe. This canoe features two padded seats with adjustable backrests, along with a center seat for additional capacity. It includes conveniences such as cup holders, padded carry handles, a gear tray, and mesh pockets.

Crazy Creek Canoe Chair II

Crazy Creek Canoe Chair II Review

Crazy Creek Canoe Chair II Feature

• Paddle all day in comfort! Specially designed to fit most canoe seats
• Straps with quick-release buckles secure chair to seat; detaches easily for use at camp
• 4" height in back for extra support and comfort
• Hook & loop portaging closure strap
• Mesh accessory back pocket and 1.5" closed-cell foam seat

Be seated in comfort! Portable Canoe Chairs for back support. canoeing or sit-on-top kayaking. We've got the portable Chairs that are specially designed to fit most canoe seats. Features a comfy, 1 1/2" closed cell foam cushion that's a real rump-saver. Details: Adjustable straps with quick-release buckles secure the chair to the seat; Detaches easily for use outside the boat too... on the beach or in camp; Hook and loop system secures chair closed during portaging; Mesh accessory back pocket; Coated 420 denier rip-stop construction. 4" height in back for extra support. 30 x 15 1/2", weighs 24 ozs. Make your trip more comfortable! State Color. Order Today! Canoe Chair II

Equinox Deluxe Canoe Carrier Regular

Equinox Deluxe Canoe Carrier Regular Review

Packaged with foam blocks in reusable mesh dunk bag with cord lock. Includes 4- wide mouth foam blocks, 3-20" straps with cambuckle and S-hook, 3-9' straps with sewn loop, 2-18' strap with cambuckle, and instructions. Regular has 4- standard mouth foam blocks. Limited quantity on Regular. Made in USA.

Tms Universal Roof J Rack Kayak Boat Canoe Car SUV Van Top Carrier

Tms Universal Roof J Rack Kayak Boat Canoe Car SUV Van Top Carrier Review

Tms Universal Roof J Rack Kayak Boat Canoe Car SUV Van Top Carrier Feature

• Wide mouth J bar offers easier loading and unloading
• Quick on/off hardware ensures fast installation and removal
• Optimally sized J style carrier leaves roof space; Made from high strength padded steel
• Mounts to SQUARE crossbars that meet the dimension requirement as shown in the following picture.
• Dimensions: 12-3/8" long x 1-3/8" wide x 12-3/8" high

This Kayak Carrier mounts to the roof of a vehicle to carry a single kayak to the river or beach. With no tools, secure the kayak rack to SQUARE crossbars.

Mad River Adventure 14.0 Canoe

Mad River Adventure 14.0 Canoe Review

For sportsmen, families or as a second canoe, the Mad River® Adventure 14 is an amazing value. The shallow-arch hull design provides smooth tracking and comforting stability, and it's constructed with polyethylene for superior durability. Packed with features like comfortable, molded seats with adjustable backrests, as well as plenty of space to store drinks, coolers, and cargo, this low-maintenance canoe is perfect for paddlers on the go.

Carlisle Old Town Snap-In Center Canoe Seat, Beige

Carlisle Old Town Snap-In Center Canoe Seat, Beige Review

Carlisle Old Town Snap-In Center Canoe Seat, Beige Feature

• Center seat snaps into place in most Old Town canoes
• Durable ABS plastic construction
• Can support 300 lbs - an adult or two kids side-by-side
• Fits Old Town Canoes with widths of 34 to 37 inches

The snap-in seat snugly snaps over vinyl gunwales and stays in place until you pop it out. This seat fits in the middle of all Old Town Canoes with widths of 34 to 37 inches. The rugged design can hold an adult or two children and carries up to 300 lbs. Consider a snap-in seat, oar sockets and oarlocks and you have a rowing canoe.

Thule Goalpost Adjustable Watersport Carrier

Thule Goalpost Adjustable Watersport Carrier Review

Thule Goalpost Adjustable Watersport Carrier Feature

• Works with Both the Hydro-Glide and Set-To-Go Carriers (sold separately)
• Hitch Mounted, Height Adjustable Load Bars
• Anti-Sway Design
• Telescoping mast
• 58-inch Thule Steel Load Bar with Durable Plastic Coating

Designed for pick-up trucks, the Thule Goalpost is an adjustable watersport carrier allowing you to transport different sized kayaks, canoes, paddleboards and sailboards to and from your destination. This Thule Goalpost was designed to work with both the Hydro-Glide carrier and Set-To-Go carriers (sold separately). When the roads get bumpy, you'll ride safe knowing that the hitch was created with an Anti-sway design for a more stable, more secure transport as well as 2 load strops to help stabilize and hold the load. The Thule Goalpost has a 58-inch Thule Steel Load Bar with Durable Plastic Coating which is constructed for maximum carrying capacity. This devise has hitch mounted, height adjustable load bars as well as a telescoping mast to adjust to varying truck cab heights so that you can secure it in safely to your pick-up truck or your pal's pick-up truck. Features: 2 Load Strops, Works with 2-inch Receivers Only. Product ID: 200701, Shipping Restriction: This item is not available for shipment outside of the United States.

Carlisle Golden Light Aluminum Canoe Paddle with Padded Shaft and T-Grip

Carlisle Golden Light Aluminum Canoe Paddle with Padded Shaft and T-Grip Review

Carlisle Golden Light Aluminum Canoe Paddle with Padded Shaft and T-Grip Feature

• Blade Material: High-Impact Polypropylene
• Shaft Material: Anodized Tempered Aluminum with Padded Shaft Grip and High-Impact Polypropylene T-Grip Handle
• Weight: 30 oz.  (60")
• Blade & grip Colors Available: Black, Green, Red
• Lengths Available: (in.) 51, 54, 57, 60

An ideal multi-use lightweight and durable paddle.  An 8" X 20" blade adds power to your stroke.  A gold anodized tempered-aluminum shaft with a soft foam grip for sure and comfortable handling.  Blade and T-grip are molded of high impact polypropylene. Colors available: Black, Red, Green, and Black. Lengths Available: (in.) 51, 54, 57, 60.

Adirondack No.4 - Cherry and Basswood, Kevlar Edge - Canoe Paddle

Adirondack No.4 - Cherry and Basswood, Kevlar Edge - Canoe Paddle Review

Adirondack No.4 - Cherry and Basswood, Kevlar Edge - Canoe Paddle Feature

• Freestyle grip, straight shaft with a 7 X 20 inch blade
• Abrasion resistant T-loc Tip (See Drw) - Doubles paddle life
• Light weight - The 56 inch paddle weighs less than 17 oz.
• Quality marine finish - 4 coats UV resistant Hybrid Alkyd Varnish.
• Full Oval shaft - 1 1/4 inch deep for max comfort and strength

The Adirondack No.4 is crafted using a hardwood and epoxy framework bonded to five Basswood staves. The epoxy is reinforced with lateral Kevlar filaments. This provides a strong but light blade while retaining the look and comfort of a wood paddle. A straight shaft is best for most paddling on rivers and for short to medium distances on lakes. Chose your length by measuring from floor to mid-shoulder. Our best paddle, handcrafted for your hands in the Adirondacks, by Courter Joinery. Kevlar is a TM of DuPont.

Sevylor Inflatable Rio Canoe - Green

Sevylor Inflatable Rio Canoe - Green Review

Sevylor Inflatable Rio Canoe - Green Feature

• Single-person inflatable canoe with one bucket seat; in green
• Provides stability, maneuverability and sea worthiness normally found in a kayak
• Durable nylon cover over PVC bladders
• Can be paddled with either canoe or kayak paddles; compatible with optional 12V trolling motor
• Maximum weight capacity: 350 pounds

Suited for paddling on rivers, lakes and streams, the single-person Sevylor Rio inflatable canoe (model KCC305HF in green) features a design that's as close to a traditional North American Indian canoe as an inflatable boat will ever get. Its double hull construction makes it very rugged and rigid, and it offers the stability, maneuverability and sea worthiness normally found in a kayak. It can be paddled with either canoe or kayak paddles and is compatible with an optional motor mount (for attaching a Sevylor SBM 12V trolling motor). It comes with repair kit and nylon carry bag.

Specifications:

• Color: Green
• Length overall (LOA): 9 feet, 7 inches
• Beam: 3 feet, 2 inches
• Weight: 25 pounds
• Maximum engine power: Sevylor SBM 12V motor
• Capacity: 1 persons
• Weight capacity: 350 pounds

About Sevylor
In 1948 in Vitry, a small suburb of Paris, France, Berco Grimbert created an electronics company called Societe Electronique de Vitry, or SEVY for short. Soon, a friend of Grimbert's from New York commissioned SEVY to produce high frequency welding machines capable of fusing a new material called PVC (poly vinyl chloride). SEVY's machines worked very well and the American friend developed a very successful business manufacturing swimming pool related products. He then taught SEVY how to work with PVC.

One of the first PVC products SEVY produced was inflatable bathtub called Dou Dou. It was an instant hit in postwar France--mothers could bathe their children even where no facilities were available. The media hailed Dou Dou as a significant invention. Soon, SEVY added small pools and flotation devices such as rings, beach balls, and inflatable swim jackets to its product line. Safe, hygienic products, made of PVC and designed for portability, durability and convenience, became the SEVY trademark.

The company quickly outgrew its small facilities in Vitry. Mr. Grimbert accepted an attractive offer from the French government to take over a defunct textile factor in the tiny Alsatian village of Buhl. After establishing its new headquarters, the company added the letters "lor" to its name, and became Sevylor. In French, l'or means gold. By coincidence, or possibly fate, Sevylor has proven to be "as good as gold" to its owners, retailers, consumers, and employees.

The Rio has a raised bow and stern and is as close in shape, comfort and styling to the traditional North American Indian canoe as an inflatable boat will ever get. It's double hull construction makes it very rugged and rigid. The canoe combines the stability, maneuverability and sea worthiness of a kayak with comfort, looks and styling of the traditional North American canoe. Ideally suited for rough waters, lakes, ocean, fishing and diving and great for beginners. Includes 1 bucket seat, removable stern storage compartment, 2 directional strakes, carrying handles, multiple d-rings and ties, motor mount fittings (to attach a Sevylor® SBM 12V trolling motor), and a nylon carrying bag

Pelican Padded Canoe Chair

Pelican Padded Canoe Chair Review

Pelican Padded Canoe Chair Feature

• Comfortable adjustable premium seat
• Excellent back support without affecting range of motion
• Fits most canoe seats

Improve your ride with the Pelican® padded canoe chair. It offers excellent support without affecting your movement, and it's universally sized to fit almost any canoe seat.

Old Town Saranac 146 XT Recreational Family Canoe with Padded Seats, 14-Feet 6-Inch

Old Town Saranac 146 XT Recreational Family Canoe with Padded Seats, 14-Feet 6-Inch Review

Old Town Saranac 146 XT Recreational Family Canoe with Padded Seats, 14-Feet 6-Inch Feature

• The thermoformed plastic hull is durable and provides high abrasion and impact resistance and a quiet time on the water
• Contoured padded comfortable bow and stern seats with padded seat-backs and molded-in cup holders, and an integral center bench seat with storage inside
• Molded-in rod holders (bow and center) plus molded-in flush mount for rod holder or anchor system on bow and stern end-caps
• Molded-in storage trays on all three seats and molded-in paddle rests at bow and stern
• End caps feature comfortable molded handles, flush mount rod holder or anchor system mounting point and line easy-cleat

Old Town started from scratch with the new Saranac family of canoes and, by narrowing the shape and slightly lowering the seats we have developed a model that paddles better than most recreational canoes on the market. The Saranac 146XT features two contoured padded seats with padded seat-backs plus a bench seat perfect for smaller passengers. The bench seat also includes a covered storage compartment. There are a variety of extras including cup holders, rod holders and storage trays designed to add convenience and versatility. The Saranac 146XT is affordable family fun! SPECIFICATIONS: Material: thermoformed polyethylene, Hull Characteristics: flat bottom, straight sides, and moderate rocker, Length: 14'6", Width: 36", Width at 4" waterline: 34.75", Bow Height: 18", Depth: 13.25", Weight: 79 lbs, Maximum load range: 700-750 lbs., Colors Available: Green or Red